Location: Support Home > Cable TV > Digital TV Setup
Connect the co-axial cable provided to the ANTENNAE or CABLE IN or RF IN (depending on the brand of your television it may be marked differently) input at the back of the television and the other end to the co-axial connection on the wall jack (RF OUT).
Please note: If you have a VCR the co-axial output from the wall (RF OUT) connects to the RF IN input on the VCR and the RF out from the VCR will connect to the RF IN on the TV.
Using the Source/Video Input button on the TV remote change the input to STD.
On the TV remote select Menu-> Channel-> Auto tune (Auto program)-> Start (Enter)
(This might be a little different depending on the brand of television you have)
Once the Auto tune is complete you should have all the available channels that you have subscribed to. You can check this by pressing Channel + and Channel – on your remote. In order to check what channels you should be receiving please refer to the analog cable listing.
Analog TV Setup (without a Digital Receiver)
To connect your TV with Novus' analog cable service, you will need the following:
- Television.
- Coaxial cable.